Warranty Information
Automotive Window Tint
Warranty Details
Tint Club provides a Lifetime Limited Warranty against color instability, fading, peeling, cracking, adhesive failure and delamination for as long as the original customer retains ownership of the stated vehicle. This warranty does not cover glass breakage or any defroster elements attached to glass.
Tint Club’s obligation under this warranty is limited to replacement of products not conforming to the original product. This warranty is valid only when the products are used in compliance with all applicable state or provincial laws. Installation of this product in a manner that violates state or provincial law is a misuse of the product and voids all warranties, expressed or implied, including but not limited to the warranty of merchantability. Tint Club shall not be liable in any manner whatsoever for damage related to the use of this product in an illegal manner or application that constitutes failure to meet state or provincial rules and regulations.
We ensure the quality of all window tint sold as a clearance product. Clearance products are not eligible for compensation through our limited lifetime warranty program.
Regulation
This warranty can be validated by completing, detaching, and sending the postcard below to Tint Club. This postcard must be filled out in its entirety and returned within 30 days of installation to validate the warranty. This warranty is limited to the original customer and is non-transferable. To validate the warranty, you may mail, fax, or email the postcard to Tint Club. Details can be found on the warranty card itself.
Warranty Claim Procedure
To make a warranty claim, please contact the original installing dealer before replacing a failed window. Your installing dealer must inspect the failed window and will initiate the warranty claim with Tint Club. If you have problems contacting the installing dealer, please contact Tint Club at (256) 926-8214 or info@tintclub.com. To expedite all warranty claims, original purchasers must have this warranty registration form, the original proof of purchase invoice from the installing dealer, a sample of the failed product, and photos showing the failed product on the vehicle.
THERE ARE NO OTHER WARRANTIES EITHER EXPRESSED OR IMPLIED. THIS WARRANTY APPLIES ONLY TO MANUFACTURING QUALITY. THE WARRANTY IS NOT VALID WITHOUT ROLL NUMBERS. The installer is solely responsible for the quality of the installation on your vehicle.
Window Tint Care
Maintenance should be followed to extend the life and appearance of your Tint Club automotive tint, as well as to maintain your warranty coverage. Do not roll down tinted windows for a period of five (5) days until the tint has properly adhered to the glass. Do not wash the tint for seven (7) days after installation. Do not use abrasive cleaners or coarse cloths. Use a mild soap and clean, soft cloth or synthetic sponge.
Paint Protection Film
PPF Care & Maintenance
To ensure the longevity of Premium Paint Protection Film, please adhere to the instructions below. Failure to adhere to the maintenance and care instructions can void the product's warranty.
- Every 3-4 months, use a non-abrasive wax or sealant application to ensure longevity to the product.
- Do not use abrasive drying materials during drying or waxing.
- Do not wax or wash vehicle for 7 days after Premium Paint Protection Film installation.
- Prevent staining by removing all bugs, sap, tar and other substances as soon as possible.
- Do not use polishing compounds, clay bars or waxes that contain dyes or abrasives.
- Do not use abrasive sponges or wash mitts during washing.
- Avoid using a high pressure sprayer too close to the vehicle.
- Do not use solvent based bug and tar removers.
Warranty Details
Tint Club. (the “Company”) expressly warrants to the owner that, for a period of ten (10) years (the “Warranty Period”) from the date of initial installation, the Premium Paint Protection Film (the “Product(s)”) will cover defects such as: yellowing, staining, cracking, blistering and de-laminating. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.
The Company will, at its option, remove or replace the Product without charge if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and labor. The replacement of the defective film is the exclusive remedy for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.
You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.
This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.
Disclaimer Warranties
The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below. You may also obtain this/these materials by contacting Company at +1-256-748-8468 or on the Company’s website at www.Tint Clubstore.com. This Limited Warranty does not cover defects caused by:
- non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
- improper storage, installation, handling and/or use of the Product;
- damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
- unreasonable or unintended use of Product;
- Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the painted surface;
- Minor conditions such as stains, and scratches;
- Damage to the wrapped surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
- Scratches, scuffs, scrapes, chips to the painted surface;
- Water spots – water spots are caused by mineral deposits, which if left to dry on the paint protection film may leave a stain, water spots are not covered;
- Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or glass manufacturer’ defects, which may be covered under manufactures protection plan; and
- Areas that have not been re-wrapped after a paint or body repair.
Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application. THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CANNOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.
Limitation of Liability
NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.
Architectural Window Tint
Product Warranty Statement
The installation of Tint Club flat glass window tint will provide many years of comfort, energy savings and protection.
Residential and commercial interior applications come with a 10 or 12 year warranty (see Warranty Terms). Tint Club flat glass window tint is warranted to the original purchaser against cracking, peeling, bubbling, delamination, or demetallization when properly installed and maintained on suitable surfaces of glass windows by an independent installer. This warranty is non-transferable.
Your Tint Club flat glass window tint installation company is committed to your satisfaction and will continue to be your representative throughout the life of the tint covered by this warranty.
Interior
Residential & Commercial - 12 Year Limited Warranty
- Silver Reflective
- Dual Reflective
- Sputtered Neutral
- Sputtered Bronze
- Security
10 Year Limited Warranty
- White Frost
- White Out
- Black Out*
*Only covered if installed on interior glass with no sun exposure. No glass breakage coverage.
Warranty Limitations
Warranty repair liability shall in no case exceed a value greater than the original invoice amount, nor order warranty repair service be extended to anyone other than the original purchaser of the tint. This warranty does not apply to glass breakage or seal failure conditions or damage due to improper care. Installing warranty replacement tint will not renew or extend the original warranty coverage time periods.
With the exception of any warranties implied by state law as hereby limited, this warranty is exclusive and in lieu of all other warranties, agreements and similar obligations of Tint Club, with respect to the repair and/or replacement of the tint. Obtaining replacement window tint as provided under this warranty is the exclusive remedy under this warranty. In no event shall Tint Club be liable in either tort or contract for any loss or damages whether direct, special, consequential or incidental arising out of the use of, or inability to use Tint Club products. Except to the extent prohibited by applicable law, any implied warranties, including the implied warranty of merchantability or fitness for a particular purpose, on these products is expressly limited in duration to the duration of this warranty.
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the installation company or company is authorized to change, modify or extend the terms of this warranty or to create or assume for Tint Club any other obligation of liability. This warranty gives you specific legal rights which may vary from state to state.
Tints designed for exterior applications must be edge sealed along with any seams using Dow Corning 795.794,790. Warranty will not be honored unless the tint has been properly sealed.
DOES NOT COVER:
- Installation defects
- Automotive tint on flat glass
- Glass or frame defects
- Triple pane glass or double pane glass with suspended tints
- Application of two or more tints to the same piece of glass
- Windows with pre-existing seal failure
- Wired, texture or patterned glass
- Partial tint application
- Warranty is void in the event of fraud or misrepresentation by tint installer or owner
Tint Care
Avoid cleaning your new window tint for at least 30 days. Visual changes after installation are a normal part of the adhesive bonding process. When the haziness/milky look and water pockets have disappeared, the tint is considered dry or “cured” and is safe to clean. Depending on the product and temperature, it may take up to 60 days for the tint to fully cure. You may clean the inside surface with any normal household strength glass cleaner and a soft lint-free cloth.
DO NOT USE abrasive cleaners, industrial strength glass cleaners or other window cleaning tools that may scratch the window tint. For best results, avoid cleaning in direct sunlight.
Curing Period
After installation, you may notice a hazy/milky appearance when you look through the tint. Water pockets may also develop as the tint cures. This is to be expected and is caused by the barrier nature of the tint. Complete dry-out should occur within 30-60 days depending on the amount of remaining installation solution, sunlight, humidity and heat directed upon the window.
DO NOT clean the tint for at least 30 days or until it has completely dried out or cured.
